Why you should ditch the old bathroom heat lamps for infrared
If you’re renovating your bathroom, you’ve probably noticed a lot of people swapping out those clunky old heat lamps for infrared systems. It’s not just about making the place look modern. It’s really about how you actually feel when you step out of the shower. Let’s talk about the “IP44” thing. You’ll see “IP44” on the box. In plain English? It just means the heater can handle the chaos of a bathroom. Between the steam and the random splashes, water gets everywhere. We build these units so moisture stays out of the electrical guts. If you try to use a heater that isn’t rated for this, the internal parts will just corrode and die. It’s a safety thing. Simple as that. Why infrared actually feels better. Ever notice how old heaters just warm up the air, but the air immediately floats to the ceiling? You’re still shivering while the ceiling is roasting. Infrared is different. It doesn’t bother with the air; it warms you directly. We use short-wave elements so the heat hits you the second you flip the switch. No waiting around in a towel for ten minutes hoping the room warms up. A few things to keep in mind for the install. Here’s the catch: these systems pull a fair amount of power. You can’t just plug them into a circuit meant for a dim light bulb. You’ll need a dedicated line and the right breaker to handle the load, or you’re just going to trip your power. And a quick pro tip?Don’t blast the tubes with ice-cold water while they’re screaming hot. The quartz tubes are tough, but a sudden shock of freezing water can crack them. We suggest positioning the unit away from the direct spray or just letting it warm up gradually. Do that, and you’ve got a setup that’s faster, safer, and lasts way longer than those old halogen bulbs.