Napájecí kabel pro ohřívač fab.

Thu, 04 Jun 2026 03:51:44 +0800

Out on the line, a fab heater’s thermal profile is only as solid as the power feeding it. A voltage dip, a loose termination, or a cable whose resistance drifts can show up as wafer-level non-uniformity—think line-width variation in lithography and inconsistent photoresist bake results. We built our power cable for fab heaters to keep that thermal loop predictable, from soft bake through hard bake, all day, every day. What matters, technically The cable is built to deliver low-noise, repeatable current in Class 1–100 cleanrooms. It holds stable conductor resistance over temperature and time, so heater output doesn’t drift with ambient swings or duty cycle. The insulation is low-outgassing and particle-resistant, keeping contamination off the wafer and out of the bake chamber. Terminations are spec’d to match common heater and cabinet interfaces, which lowers contact resistance and prevents hot spots. Shielding and routing options cut EMI coupling into adjacent instrumentation—because even small interference can throw setpoints off. Why it holds up in production In photoresist processing, thermal uniformity and repeatability define the process window. This cable keeps the heater supply steady, supporting ±0.1°C control targets and protecting the thermal budget across lots. The payoff is fewer excursions, tighter critical dimension control, and less scrap. Energy use drops, too—stable terminations and consistent resistance mean less wasted heat at the connection. And uptime shows it: we’ve got field deployments running continuously with zero unplanned heater interruptions tied to the cable. The practical details Compatibility comes down to heater power, voltage, and connector mating. Plan cable length and bend radius so you don’t force tight routing that can raise local temperature and accelerate aging. Lock in termination style and pin assignment up front to avoid rework in the field. Match operating temperature and current rating to the heater duty cycle—when thermal load peaks, derating isn’t optional.

Cable on Infrared Heating Applications

Napájecí kabel pro ohřívač fab.